RETOUR
FACILES
ENTREPRISE
LOCALE
MEILLEUR
PRIX
The Hello was built in response to a growing demand for a true resort board. Using the same outline as the Hel YES., this new model shares the edge hold and carving ability of UnderBite to deliver performance on the groomers, side-hits and in the park. The directional twin shape allows it to float shamelessly through powder and chatter, making it a true quiver-killer.
OUTLINE: UNDERBITE
Better edge hold and easier turns. Redistributing rider weight and input power, UnderBite enhances turning ease and edge hold. By having the edge pulled back a couple of millimeters at the binding area acts like a gas pedal or a segregated knife, enhancing the cutting power of the edge. While you are turning on hard packed snow you need an insertion point to ease the edge in and then you need the edge to drive thus we have only a couple inlays because once you’ve engaged your edge you are driving your turn. UnderBite allows you to have that extra leverage to apply power to the edge where you want to. From nose to tail you have better edge control and a smoother drive.
CORE: FULL POPLAR
Our baseline core for tip to tail woodcore snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.
BASE PROFILE
DIRECTIONAL CAMROCK 2-3-2
BASE MATERIALS: SINTERED SPEC
Just like it says. Pellets or coarse powder are pressed until they form a solid. There are several suppliers for our entire industry, and each have different codes for them depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed often and prepared for local conditions.
|
Board Length (cm) |
146 |
149 |
152 |
155 |
|
Surface Area (dm2) |
36,2 |
37,3 |
38,1 |
39,3 |
|
Tip Length (cm) |
19,5 |
20 |
20,5 |
22 |
|
Tail Length (cm) |
19,5 |
20 |
20,5 |
22 |
|
Effective Edge Length (cm) |
111 |
113 |
115 |
117 |
|
Contact Length (cm) |
107 |
109 |
111 |
111 |
|
Waist Width (cm) |
23,9 |
24,1 |
24,2 |
24,4 |
|
Front Foot Width (cm) |
24,4 |
24,7 |
24,8 |
25 |
|
Rear Foot Width (cm) |
24,6 |
24,8 |
25 |
25,3 |
|
Tip Width (cm) |
28,3 |
28,5 |
28,6 |
28,8 |
|
Tail Width (cm) |
28,3 |
28,5 |
28,6 |
28,8 |
|
Taper (cm) |
0 |
0 |
0 |
0 |
|
Rocker / Camber (mm) |
R0.2-C0.3-R0.2 |
R0.2-C0.3-R0.2 |
R0.3-C0.4-R0.3 |
R0.2-C0.4-R0.2 |
|
Sidecut Radius (m) |
6.7 (MULTIPLE) |
6.9 (MULTIPLE) |
7.1 (MULTIPLE) |
7.3 (MULTIPLE) |
|
Ref. Point (cm) |
49,5 |
50,8 |
53,3 |
54,6 |
|
Ref. Point (in) |
19,5 |
20 |
21 |
21,5 |
|
Ref. Stance Setback (cm) |
1 |
1 |
1 |
1,5 |
|
Min Ref. Stance Width (cm) |
45,5 |
46,8 |
49,3 |
50,6 |
|
Min Ref. Stance Width (in) |
17,9 |
18,4 |
19,4 |
19,9 |
|
Max Ref. Stance Width (cm) |
53,5 |
54,8 |
57,3 |
58,6 |
|
Max Ref. Stance Width (in) |
21,1 |
21,6 |
22,6 |
23,1 |
|
Rider Weight (lbs) |
100-140 |
110-150 |
120-160 |
120-170 |
|
Rider Weight (kg) |
45-63 |
50-68 |
54-72 |
54-77 |
