Jones Men's Ultra Mind Expander Snowboard

Premium sintered base
Life's too short to ride slow bases! All our boards have hyper fast sintered bases made from super durable and wax absorbant premium P-tex. See the tech features for specific base details.

Ultra Construction
Ultra Construction is the redefinition of what it takes to build a snowboard.We’ve tested every inch of the board to precisely position materials exactly where they are needed while eliminating all excess materials. Jones Ultra boards are the lightest, yet most durable snowboards on earth.

Factory tuned, ready to shred
Buy it, mount it, rip it! All boards leave the factory ready to ride with de-tuned tip + tail, edges angled at 90°/0° and bases waxed with Wend natural wax. 

100% 3D Contours Base
Welcome to the future. 3D Contour Bases are next-level tech that enhances glide + float and delivers unmatched turn flow and fluidity in any snow condition.

Basalt Power stringers
Sustainable stringers made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

Triax Fiberglass
Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Sustainably sourced woodcore
All Jones wood cores are made from wood species that have been sustainably grown and harvested. See the tech features page for more details.

Built for SkateTech bindings
Like peanut butter and jelly, the Traction Tech edge bump pattern aligns perfectly with SkateTech bindings for unreal response and edge grip. 

Traction Tech edges
Like a serrated knife slicing into the snow, Traction Tech improves your edge grip on firm snow.

Sustainably made, built by the sun
We strive to make gear with the least carbon footprint possible. All boards built with Bio Resin, recycled side walls + edges and sustainably sourced wood cores + topsheets. Jones boards are also now built with 100% solar power!

Forever Flex
Forever Flex is a new manufacturing process that helps stabilize the flex and rocker of a board for its lifetime.

3D Contour Base 3.0
Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

Progressive sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Directional flex pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

V-core
Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.

Blunt nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

Christenson Surf Camber/Rocker
Custom rocker/camber flex pattern designed by surf shaper Chris Christenson. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board and helps keep the tail catch-free initiating turns and landing switch.

Built with the finest tech and materials
100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing processes. We accept no compromises in producing the most durable and sustainable snowboarding gear.

Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Sintered 9900 Base
Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.

Ultra Construction
Ultra Construction is the redefinition of what it takes to build a snowboard.We’ve tested every inch of the board to precisely position materials exactly where they are needed while eliminating all excess materials. Combining these innovative construction techniques with superlight wood cores and carbon fiber deliver revolutionary results. Jones Ultra boards are the lightest, yet most durable snowboards on earth.

Triax fiberglass
Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Carve Pack
Allows more centered stance option for riding firm snow.

Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Oversized recycled edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Forever Flex
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Recycled rounded ABS
Rounded sidewall finish that improves board durability by protecting topsheet from chipping.

Basalt Power stringers
Sustainable strength. Basalt stringers are made with 100% natural fibers and help transfer power to the edges, improve torsional response and absorb board chatter.

Ash wood veneer
This ash wood veneer top layer delivers added responsiveness and is the most natural way to find the best balance between absorption and pop.

Power Core
Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.